Long Lasting High Durability Thermoplastic Road Marking Paint
Product Descriptions:
|
Product Name
|
Thermoplastic Traffic Paint |
|
Drying time (25℃)
|
Touch dry≤0.2 hours / Hard dry≤6 hours
|
|
Adhesion strength, S
|
≥60
|
|
Flexibility, mm
|
≤0.03
|
|
Moh's hardness
|
≥8
|
|
Coverage (advise 2 coats)
|
0.15kg/sqm per coat
|
Quick Details:
Thermoplastics typically have a service life of 3-5 years, depending on conditions. In winter climates, thermoplastics are very susceptible to snow plows due to its raised structure and can be sheared completely off, leaving no marking on the road. In addition, thermoplastics are sensitive to changes in temperature in which “freeze-thaw” will typically cause cracks, pinholes, and grooves throughout the entire marking. Thermoplastics must be heated at a very high temperature, between 400 and 450 F, to be effective. This high temperature, besides the risk of burns, will also lead to application errors, most noticeably a darkening of the material should it be applied too hot, or reside in the application kettle too long. Finally, thermoplastic performs poorly on concrete unless a primer is applied beforehand, which adds a second application step.
Features:
1. Good adhesion
2. High durability
3. Quick drying
4. Low VOC
5. Fast Application
6. Resistant to color fading
Advantages:
Superior environmental impact - as measured by life-cycle analysis, compared to other pavement marking technologies. Enhanced retention of glass beads and greater flexibility - for extended retroreflectivity and improved night-time visibility. Fast-drying properties - with fast-dry-to-no-pickup and resistance to early rain showers under a wide range of climatic conditions. Improved wear properties - over various bituminous and concrete road surfaces. Low-VOC formulations - that exceed most road-marking paint regulation.
Product Tags:
|
|
Hot Melt Thermoplastic Road Marking Paint White Line 1mm Long Lasting Images
|
